|
Advertisement
Quick Links
Download this manual
Safety Cautions
Warning
• The user shall not install or repair the
SHS-P718
product without authorization.
• Do not install the product in the place
where the gap between the door and the
frame is 5mm or more.
• Make sure that no unauthorized person
has the access to the password.
• Do not operate the product with wet
hands, and keep liquids such as water
or drinks away from the product, or
the product may malfunction or be
damaged.
• Do not use the excessive force or sharp
objects to push the lockbuttons, as this
BIOMETRICS
can damage the product.
Convenient Opening
• Make sure that the door is completely
closed when going outside. The
Easy push/pull handle access
manufacturer does not assume the
Welcome Function
※ In order to safely use the product, please read "Safety Precautions".
When a user gets close to the door lock,
※ The features of this product and the contents of the user guide may be changed
the authorization standby mode will
without notice for quality improvement.
automatically activate.
Product Components
Silent-Mode Function
When going in or out, the sound of the key
The product components used may vary depending on the installation
entering and door opening will be suspended.
environment.
Automatic Card Reading Function
Outer Body
When a card touches the reader,
the reader will conveniently recognize the card.
BIOMETRICS
Double Authorization
Requires fingerprint & password combination to open
Security Assurance Function
When someone is inside the house,
authorization for entry from the outside
will be prohibited.
Built-in Fire Detection
Generates alarm in case of a fire
Security Function
Prevents intrusion from the outside
Key Tag (For B2C Only)
User Manual, Product Warranty
'AA' Batteries (LR6) (8EA)
www.samsungsns.com
GC68-02025A ED:01
Opening the Door from Outside with a Password
Opening the Door from Outside with a Card or Key Tag
When purchased, the product is set to Multi-leveled Security Code Entry
The door can be opened from outside using a card or key tag.
Mode initially. Please refer to "Multi-leveled Security Code Entry Mode
Place the registered card or key tag on the card reader.
setting" for Common Mode setting.
Placing the Card or Key Tag
※
Silent Mode
on the Card Reader
Before entering the password, press the [
] button and enter the
BIOMETRICS
password, then both the sound of the key entering and the door opening
will be suspended. It is a useful function if you do not want to disturb
neighbors when you go in and out at night.
1. Multi-leveled Security Code Entry Mode
Opening the Door from the Inside
Success:
DING DONG DENG
Opening by Pulling the Inner Handle
Fail:
DING DONG DING
DONG
Touching [Number
When two arbitrary buttons
When the numbers on the
Pad] will light up
are lighted, press the buttons
number pad are lighted, enter
the number pad.
in order.
the password and press the
[] button.
2. Common Mode
Closing the Door from the Inside
Success:
DING DONG DENG
Automatic
Fail:
Locking Setting
DING DONG DING
DONG
Manual
Touching [Number Pad] will light
Enter the password when the number
Locking Setting
up the number pad.
pad is lighted, and press the [] button.
Password must be entered after the light is on, and if does not, touch
●
[Number Pad] and re-enter.
●
To cancel, press [
] button and re-enter.
Note
Note
If the password is wrong 5 times, "peep" warning alarm will sound
●
20 times and the system will shut-down for about 3 minutes. When
Initialization (Password, Card, Key Tag)
malfunction happens, "beep" will sound every 10 seconds, and stop mode
will be turned off automatically after 3 minutes with multiple 'beeps'.
All registered data (password, card, key tag) are deleted. After initialization,
Opening the Door from the Outside with
the password is set to '1234', and the registered card, key tag data are
a Fingerprint
erased. Please register a new password after initialization.
1. Pressing the [Register]
Open the door from the outside using the fingerprint authentication system.
Button (from the inside)
Touch the sensor properly with the fingerprint part of your finger which has
been registered.
1. Pressing [Open Fingerprint
2. Reading Fingerprint
Cover] Button
Success:
DING DONG DENG
Fail:
BIOMETRICS
DING DONG DING DONG
Press and hold the [Register]
Touch the Fingerprint Reading Panel
button for 5 seconds.
with the registered fingerprint after
Press the [Open Fingerprint
LED light turns on, the lid of the panel
Cover] button and the lid of the
closes in approximately a second
Fingerprint Reading Panel opens.
later. Then push the door handle to
4
open the door.
Outer Body Parts
Number Pad Unlighted
Touch Number Pad
This section contains important information to ensure the user's
safety and prevent potential damage to property. Please, read
this section carefully and use the product accordingly.
responsibility for any harm caused
by engagement of the lock on an
improperly closed door.
• Please do not hang on the product or
pull it.
• Be sure to correctly match the poles
(+/-) when installing the batteries. Install
the batteries with the correct poles (+/-).
Silent Mode Switch
• Replace all batteries immediately after
they run out of power, and never mix
new batteries with used ones.
• Do not use water, benzene or alcohol
when cleaning the product, as these
fluids can cause product malfunction.
Inner Body Parts
• Replace the batteries within 1 week
after the battery replacement alarm
sounds.
Battery Cover
Mortise
Inner Body
Registration
Button
CLOSE Button
Strike
(For B2C Only)
Strike box
Mortise
Handle Shaft Spring
Handle Shaft
,
Installation Screws
Installation Manual(For B2C Only)
2
Password Change
The password can be 4~12 digits number. Only one password can be
registered.
1. Pressing the [Register] Button
(from the inside)
Place the card or key tag on
DINGDONG
the card reader.
Success:
The door will be opened after
DING DONG DENG
Fail:
1 second.
DING DONG DING
Open the battery cover of the
DONG
inner body and briefly press the
[Register] button.
3. Entering a New Password
(from the outside)
Please be careful not to trap
●
your hand during use.
Warning
Enter the new password (4 to 12
digits) and press the [
5. Checking New Password Operation (from the outside)
To make sure the password has been properly registered, check the new
password and close the door.
The door is automatically locked 1 seconds after the door is
closed.
●
Manage your password with care so that unauthorized people will not have
access to it. Regularly changing your password can reduce the risk of it
The door is locked when the
being leaked.
Warning
[Close] button is pressed
Fingerprint, Card and Key Tag Registration
●
To check if the door is locked from the inside, press the security button
You can register and use up to 100 fingerprints.
briefly; the red LED will flash if the door is locked and the blue LED will blink if
the door is unlocked.
Up to 20 cards, including the key tag, can be registered.
(Only ISO14443 A Type is available.)
1. Pressing the [Register]
Button (from the inside)
DINGDONG
2. Entering the Numbers for
Open the battery cover of
Initialization (from the outside)
the inner body and briefly
press the [Register] button.
[Fingerprint Registration]
DING DONG
DING DING
3. Reading the Fingerprint to Be Registered
DING DING
DING DING
When the number pad is lighted, enter
DING
'4560852580' and then press the [
]
button.
- Success: DING DONG DENG
When LED light on the Fingerprint Reading Panel is on,
touch the panel with the fingerprint to be registered.
- Fail: DING DONG DING DONG
When a "ding" sound is heard and LED light goes off,
5
then remove the finger. (Must do it 3 times)
5. Registration Confirmation
Success:
DING DONG DENG
Number Pad Lighted
BIOMETRICS
Fail:
DING DONG DING
DONG
Fingerprint
Reading Panel
BIOMETRICS
[Card and Key Tag Registration]
Open Fingerprint
Cover Button
3. Placing the Card or Key Tag
Card Reader
BIOMETRICS
on the Card Reader (from the
BIOMETRICS
outside)
Proximity Sensor
DING DONG
DENG
Number Pad
Place the card or key tag to be registered
Entry Complete/
Away Security
on the card reader of the outer body. You
Setup
Button
will know the card or key tag has been
Emergency Alert
Light
registered when "DING DONG DENG"
Battery
Double Lock Light
Replacement
sounds.
Time Alert
External Power
Contact Part
To register multiple cards or key tags, lightly place another card or key tag
●
Reset Switch
to the card reader within 20 seconds after registering the previous card or
Warning
key tag.
Deleting Registered Fingerprints & Cards
The Battery Cover Release
You can delete individual or all registered fingerprints and cards.
Button
(After pressing the battery cover
release button, pull towards the
1. Pressing the [Register]
front, and then the battery cover
Button (from the inside)
will open.)
1.5V AA Batteries
DING DONG
DING DING
Press the [Registration]
button for 3 seconds.
Sound Control Switch
Built-in Wireless Module
(Optional)
[Deleting Fingerprints]
Auto/Manual
3. Reading the Fingerprint to Be Deleted
Locking Switch
DING
When LED light on the Fingerprint Reading Panel is on,
touch the panel with the fingerprint to be deleted.
[Deleting Cards]
3. Entering the Card Deletion Codes
Deadbolt
Latch bolt
DING DONG
DENG
Open-door sensor
When the light on the Number Pad is
3
on, press '88' and then the [
] button.
Welcome Function On/Off
The welcome function is a convenient function that automatically activates
the authorization standby mode when a user approaches the door, even
2. Entering the Current Password
before touching the number pad.
(from the outside)
DING DONG
DENG, DING
DING
DONG
DING
Enter the current password ('1234' after
initialization) when the number pad is
Open the battery
[1]+[] button: Welcome function on, the one-
lighted, and press the [
] button.
cover and press
4. Entering a New Password (from
[Registration] button
[2]+[] button: Welcome function on, the one-
briefly.
the outside)
[3]+[] button: Welcome function off
DING DING
DING DONG
On and Off / Function Description
DENG
- Welcome function on: The mode will automatically activate the authorization
standby mode when a user approaches the door lock.
Enter the new password again
] button.
to check if the new password is
- Welcome function off: The mode will authorize a user when the user enters the
accurately configured, and then press
password on the number pad or connects a card to the number pad.
the [
] button.
- One-minute alarm function on/ off: When someone remains in front of the door
lock for more than a minute, this mode will sound the tamper prevention alarm.
●
The factory defaults are set with the welcome function on and the alarm
function off.
The working distance of the infrared sensor can differ depending on light
●
Caution
conditions and other environments. When the front door is exposed to sun
light or constant bright lights it is advised to limit the usage of the sensor
as it might sound the alarm.
Door Lock Time Setup Function
This function sets the time interval between the moment the door open/
closed sensor recognizes the door as closed and the moment deadbolt locks
the door.
In an environment that the door closes slowly and the deadbolt jams before
2. Entering the Current Password
the door is fully closed, the situation can be fixed by adjusting the door lock
(from the outside)
time.
DING DONG
DENG, DING
DING
DING
DONG
Enter the current password ('1234' after
initialization) when the number pad is
Open the battery cover
lighted, and press the [
] button.
of the inner body
and briefly press the
4. Exiting Fingerprint
[Register] button.
Registration Mode
Intrusion Detection Function
Success:
DING DONG DENG
DING
This function generates the alarm sound when an attempt is made to
Fail:
DONG
DING DONG DING
DENG
forcefully open the door from the inside or the outside.
DONG
(This is a basic function of the lock, and cannot be separately set or released.)
To end the registration,
please press the
If the door is forcefully opened while locked, the door opening sensor detects
[Registration] button on the
it and generates the alarm sound.
6
inner body.
Multi-leveled Security Code Entry Mode Setting
Press the [Open Fingerprint
Cover] button on the outer
You can set the security mode suitable for your use when you open the door
body to open the lid of the
Fingerprint Reading Panel
using a password.
and touch the panel with the
registered fingerprint.
DING
4. Confirming Card or Key Tag
DONG
Registration (from the outside)
Briefly press the [Register]
Press the [] button after pressing the
button on the inner body.
[7] or [9] button, and the security mode
will be set.
Place the registered card or key
Double Authorization Mode Setting
tag to the card reader on the outer
body.
The Double Authorization mode is an enhanced security function with two
factor authentication in which both password and fingerprint are required
when opening the door. To set up the Double Authorization mode, at least one
fingerprint has to have already been registered.
DING
DONG
Briefly press the [Register]
Press the [] button after pressing the
2. Entering the Current Password
button on the inner body.
[4] or [6] button, and the authorization
(from the outside)
mode will be set.
Two-factor Authentication
DING DONG
Mode Operation
DENG, DING
Success:
DING
DING DONG DENG
Fail: DING DONG
Enter the current password ('1234' after
DING DONG
initialization) when the number pad is
lighted, and press the [
] button.
Touching
Enter the password when
the number pad is lighted,
[Number
4. Exiting Fingerprint
and press the [] button.
Deletion Mode
Pad].
Sound Setting and Releasing
Success:
DING DONG DENG
DING
Fail:
DONG
The sound that is generated when the number buttons are pressed, when the
DING DONG DING
DENG
DONG
door is locked or when the locked door is unlocked, can be set according to
To end the deletion of
the user's preference. The product is set to generate all sounds at the factory.
registered fingerprints, please
press the [Registration] button.
Open the
battery cover
on the inner
body.
- [0] Button: All sounds except the alarm sound are deactivated.
- [1] and [2] Buttons: All sounds are activated and the sounds get bigger as the
step become higher.
7
Automatic/Manual Locking Setting
The Automatic Locking mode allows for automatic locking of the door when
it is closed.
Open the
battery cover
on the inner
body.
DING DONG
- Automatic: The door is automatically locked 1 seconds after being closed.
DENG
- Manual: The door does not lock automatically, and [CLOSE] button must be
pressed from the inside, touch [Number Pad] to close the door.
Replacing the Batteries
minute alarm function on
Battery Replacement Alarm Generation
minute alarm function off
If the melody of "Blues for Elise" sounds when opening the door with the
password or fingerprint or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Replacing the Battery
Replace all 8 batteries within a 1 week of the first alarm sound.
- The unit will stop operating suddenly if the batteries are not replaced.
●
Depending on battery manufacturer, date of manufacture and the user
environment, the duration of use may vary.
(In the case of average use, given as 10 times a day, 8 AA alkaline
Warning
1.5Vbatteries can last for 12 months.)
If the poles of the batteries are not placed properly, the lock will not operate
●
normally.
Liquid leaks from batteries can damage the product. Check the batteries
●
regularly (every 6 months).
●
After the battery replacement alarm has sounded, password/fingerprint/card
information cannot be registered, changed, deleted, initialized or configured
until the batteries are replaced.
Using the Emergency Battery
If the batteries are not replaced after their replacement time comes, they will
be completely discharged and the lock will not operate.
Opening the Door Using an Emergency Battery
Purchase an emergency battery (9V) at the nearest store.
Default: 1 second
- As the alkaline batteries offer longer life, they are recommended
[51] : 1 second
over the manganese batteries or rechargeable ones.
[59] : 9 second
Press [51] ~ [59] button,
and then press [] button.
While connecting a 9V battery to the External Power (Emergency
Battery) Contact Part on the outer body, have a registered fingerprint
read or enter the password.
10
Security Assurance Mode Activation/Deactivation
At-home security mode is to prevent opening of the door from outside while
someone is inside.
DING DONG
DENG
Security Assurance Mode
Security Assurance Mode
Activation
Deactivation
[7] Button : Multi-leveled
Security Code Entry
Mode
[9] Button : Common Mode
DING DONG
DENG
While the door is locked, press
Pull the inner body
[Security Assurance] button
handle to open the door,
on the inner body part for 3
and it will deactivate.
seconds.
Security Assurance Mode Operation
Rapid beeping
DING DONG
Or
Inside: Press the [Security Assurance] button,
DENG
then the sound for action-unavailable
[4] Button : Double
willbe heard.
authorization mode on
Outside: Press the [Number Pad] or touch with
[6] Button : Double
a card, then the sound for action-
authorization mode off
unavailable will be heard.
●
When the security assurance function is activated, the door cannot be
unlocked from the outside, so please be careful. Be especially careful not
Warning
to allow children to set this mode accidently from the inside.
Setting the Security Function
Success:
DING DONG DENG
Fail: DING DONG
DING DONG
This is a function to prevent any intrusion while you are out. Should the door
be opened from the inside while the intrusion prevention function is on, the
Touch a registered fingerprint
on the Fingerprint Reading
emergency alert light will flash and the alarm will make "beep beep beep~"
Panel. After a successful
sound.
authentication, the door opens.
Setting the Security Function
Releasing the Security Function
DING DONG
DENG
Put the [Sound Control]
switch on one of [0],
After touching the Number Pad,
1. When the door is closed [
] of the
[1], or [2], and close the
have a registered fingerprint read, or
outside body's number pad will light up.
battery cover.
contact a registered card, or enter the
2. Press and hold the [
] button on the
password and then press the
outer body for 3 seconds while the door
[
] button.
is locked.
8
Alarm Sound (Prank Prevention Function)
This function generates an alarm sound and deactivates lock operation when
it is improperly handled from the outside.
Set the [Automatic/Manual
This alarm will sound if an attempt is made to open the door with an invalid card, or
Locking] toggle switch of
if a wrong password is entered five times in a row.
the Inner Body to the 'A'/'M'
The alarm sound is generated, and the lock is deactivated for 3 minutes. While the
position.
door is in this inactive mode, a single "DING" sound is generated every 10 seconds
and seven consecutive "DINGS" will sound after 3 minutes. Following this, the lock
is released from inactive mode.)
Releasing the Alarm
Inside
Press the [Register] button.
Get a registered fingerprint or a registered card authorized or
Outside
enter the password and then press the [
] button.
Built-in Fire Detection Function
This function generates the alarm sound when fire is detected so that the
residence can quickly respond. The built-in fire detection function is a basic
function of the lock, and cannot be released by the user.
Fire detection function is operational at about 75 ℃ ± 10 ℃; this can vary
depending on the installation environment.
When fire occurs, the temperature sensor detects it and flashes the
[Close] button while generating the alarm sound.
The door is automatically opened after the alarm sound has stopped.
(The lock resumes normal operation if the inside temperature returns to
a normal level.)
The built-in fire detection function is activated when the temperature rises
around 60°C, which may differ depending on the installation environment.
Product Specifications
Item
Specifications
Voltage
AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
Emergency
Power
9V Battery (6LF22) (Separately sold)
Source
Operation
Electronic Control Method (Password entry or fingerprint
Method
or card or key tag reading)
Weight
3.9 kg (including both inner and outer bodies)
Outer Body
(including the
85mm(W) × 387mm(H) × 61mm(D)
handle)
Product
Dimensions
Inner Body
(including the
86mm(W) × 354.8mm(H) × 63 mm(D)
handle)
●
The contents of this user guide are subject to change without prior
notice to the user in order to enhance performance of the product.
11
DING DONG
DENG
DONG
Or
9
12
Previous Page
Next Page
1
2
Advertisement
|